It can be a tough decision deciding which type of boiler is right for your home. It needs to be practical and fit in with your lifestyle and needs. Here is some information about the different types of boilers available, the advantages of each and which homes they work best in:

Combi Boilers

More formally known as combination boilers, these offer great efficiency in water heating and central heating. It does both in a single unit. A combi boiler heats water from the mains directly whenever you turn a tap on, so there is no need for a water storage cylinder or water tank in the loft.

The reason why they represent such great efficiency and cost-savings is because the water is heated immediately when you need it and not heated and then stored inside a cylinder. Your hot water also comes out at mains pressure, so you can get a delightfully refreshing power shower without needing an extra pump.

The small compact size of combi boilers makes them ideal for homes with less space. They are also suited to properties where:

There is very small loft space or none at all

The amount of living space is increased as there is no requirement for a hot water cylinder

You could still carry out a loft conversion as there is no need for a cold-water storage tank

There is no hassle of pipework freezing

No risk of loft pipework freezing and as there is less pipework, installation is often cheaper. Find out more about Forest of Dean Boiler Installation with greenplanetheating

Image credit

System Boilers

Having a system boiler requires a hot water cylinder but most of the system components are built into the boiler itself so it’s easier to install. You also won’t need to install a tank in the loft, so system boilers are a viable option for homes with small or no loft space. This type of system is also compatible with solar heating.

They make a good choice for homes with more than one bathroom as you get a constant hot water supply to any number of taps and at the same time.

They offer good economy and built-in components make it easier and faster to install.

Image credit

Regular Boilers

Also known as traditional or conventional boilers, this type is generally better suited to homes that already have a traditional hot water and heating system that has a separate cylinder.

This is a sensible replacement for an existing boiler with an older system of radiators throughout. This set-up might possibly not cope with the increased water pressure that results from having a combi or system boiler.

They are ideal for homes with multiple bathrooms where a lot of water could be required at the same time and also where water pressure might be lower. They are also compatible with solar heating set-ups, which can offer reduced energy costs and less of a carbon footprint.

Cadmium plating is an extremely useful addition to countless industrial and electronic components. Cadmium is used across a variety of industries due to its numerous useful qualities, including its conductivity, high levels of resistance to corrosion and its versatility. You can read more about cadmium plating below.

Image Credit

Plating

Businesses operating in the field of plating have to abide by numerous regulations on a day-to-day basis. Many of these regulations are put in place in order to protect workers, members of the public and the natural environment as a whole. As with any industry, it’s important that firms in this field closely follow the rules in order to avoid fines or prosecution. This is why it’s so important to only deal with reputable businesses when you are looking at having components or industrial tools plated. Any firms working with cadmium plating must comply with strict health and safety and environmental legislation.

Although many researchers within various industries are hunting for replacements for cadmium in order to gradually phase it out in favour of more eco-friendly plating materials, according to Science Direct, it is still extremely widely used today.

If you require industrial plating or coatings for your business, there are plenty of options out there. Reputable firms such as https://www.poeton.co.uk/, who have decades of surface engineering experience, will be able to help you.

Image Credit

While plating has been used by industrial businesses for over 100 years, it is now also commonly used by tech companies too. Cadmium is popular in a range of industries due to its robustness and versatility. Just a few of the industries that use cadmium plating every day are the defence, automotive, electronics and aerospace industries. Cadmium is also useful to anyone working with components that are going to be exposed to a lot of salt water in a sea or ocean environment, as it’s tough enough to endure such conditions.

Cadmium Plating Benefits

Here’s a brief overview of some of the benefits offered by cadmium plating:

– It’s highly resistant to corrosion
– It has exceptional conductivity
– It solders well
– It’s resistant to the growth of bacteria and mould
– It can be painted
– It’s naturally low-friction
– It is suitable for bonding with various adhesives
– It can be used on a variety of substrates, including aluminium and steel

Despite the political and economic uncertainty of the past year as a result of Brexit, HMRC recently released figures that showed house sales as of October 2018 had increased year on year by 3.92%, rather than dropping as many industry experts had predicted.

Image Credit

Not only did house sales increase year on year, but they also increased month on month, with the number of completed home sale transactions going from 98,360 in September 2018 to 111,950 in October 2018, an increase of 12%. If this growth continues as it is expected to through November and December, total UK house sales for 2018 will be similar to those in both 2017 and 2016, standing at around 1.2 million homes.

Growing Confidence in the Sector

HMRC’s report has led the sector to grow in confidence as such positive figures were not expected. Some experts urge caution, however, as not all parts of the UK were as buoyant as others when it came to home sales. London and the South East, for example, saw slower growth than might be expected, while Rye on the Isle of Wight, Diss in Norfolk and the West Midlands town of Smethwick saw the highest levels of property growth (up to 10% compared to a national average of 1.02%).

First-Time Buyers

Many of these sales were to first-time home buyers who were taking advantage of Help to Buy and helped along by a reduced number of landlords buying rental properties This is good news for the industry, with experts such as conveyancing solicitors Guildford based https://www.samconveyancing.co.uk/conveyancing-solicitors/conveyancing-solicitors-Guildford feeling that 2019 could be an even better year for house sales.

Image Credit

Expert Opinion

Haart’s, the UK’s biggest independent estate agent, said they thought the market could be supercharged next year, for example, believing that many people are holding off buying or selling a property while they wait for the outcome of Brexit. Their belief is back up by a 37% increase in the number of people registering interest in new homes with them. Whether this will be the case has yet to be seen. We will likely know more after the Brexit vote due in early January. However, if estimates from agencies such as Haart’s are to be believed, it could end up being a bumper year for the sector.

There is a reason why moving to a new house in the winter is cheaper – fewer people want to make such a move with the cold, the ever-present risk of snow and ice, and Christmas smack bang in the middle. This does not mean it is an impossible task, but it does take some extra thought and planning. Here are our top tips for anyone planning to move home in the winter.

Image Credit

Pack things in sturdy, weather-resistant materials

Old-fashioned tea chests – once the top choice for moving home – are invaluable for bad weather moves; however, sturdy, thick cardboard boxes with fully closable lids will do. Avoid banana boxes and anything made of flimsy cardboard. Check the mover has tarps to protect your carpet and your furniture before it is taken outside.

Time things carefully

There are fewer daylight hours in winter, so an early start on loading is a good idea, especially if you are not moving too far away and can arrive, unload and start unpacking the essentials while it is still light enough to see. Always carry a torch in case there are any issues with utilities at your new place. If possible, arrange to have these turned on a couple of days before you move in – you could even have the new place heated for your arrival.

Image Credit

Check the weather forecast

If ice is expected, it is helpful to have some rock salt handy to grit the paths at both ends of the move.

Keep an emergency bag separate

Apart from the usual things you need to hand at all times, include a couple of changes of clothes in case you get wet on the day.

Use a local company

Local companies drive around and beyond the local area every day, so there is nobody better for knowing the roads and particularly which are safest in bad weather; for example, for the best moving experience in Bristol, choose a Bristol removals company such as imoveremovals.co.uk.

Moving to a new house in the winter may not be as straightforward as doing the same thing in other seasons; however, with a little advance planning, it can be just as easy and is generally cheaper. You also get to enjoy cosy evenings in your new home without having to tackle chores such as gardening.

Christmas time and the New Year can be a time for people to enjoy an alcoholic drink or two, but that doesn’t mean that non-drinkers should have to miss out. There are many drinks that can be enjoyed at Christmas that do not involve alcohol and there are also so many great mocktails that you should definitely have a look at. Even if you are having a party that is going to be catered for by Mobile Bar Hire Gloucestershire company www.wearethemoversandshakers.com/mobile-bar-hire-gloucestershire/ you can still enjoy some tee-total delights.

Why not start the festive season off with some alcohol-free eggnog?

Image Credit

Made from the following ingredients this drink is a popular one around Christmas time and is relatively easy to make:

Milk

Cloves

Cinnamon

Condensed Milk

Egg Yolks

Sugar

Whipping Cream

Nutmeg

Vanilla Extract

You essentially combine all of the ingredients in a pan over a moderate heat to create this beautiful smooth drink. Dusting with some nutmeg is a must. If you are looking for a step by step recipe then take a look here.

Image Credit

Another seasonal favourite is the Blackberry mocktail made from a selection of blackberries mixed with orange juice and lemon juice with a small dash of cinnamon syrup to give it that Christmassy flavour. It is one drink that smells incredible and will have you wanting to drink it over and over again whilst you enjoy your Christmas meal. It is also a great option to prepare in advance for New Year’s Eve. If you find it difficult to find cinnamon syrup you can make your own by infusing cinnamon with water and white sugar. You should have equal parts water to sugar in order to make a syrup of any kind. You boil all the ingredients together and then strain to get a smooth, bit free syrup.

A favourite of mine to have with the evening food on Christmas day is the Cranberry Spice. This drink is incredibly easy to make and has a wonderfully fresh flavour that gives me a much-needed pick me up towards the end of the day at Christmas. The ingredients include cranberry juice, water, a bitter or tonic of some description, fizzy apple juice, fresh cranberries and an orange wedge to garnish. You simply place all of the ingredients in a glass including the fresh cranberries, stir it around and then decorate with a nice wedge of orange and enjoy.

Silicone – we have all heard of it, but what actually is it, where is it, and what does it do?

Image Credit

In brief, silicones are specialised materials that include silicone polymers, silicone fluids and reactive silanes. They are super-high performance materials that can be found in all kinds of places, from aerospace to health care, personal care and cosmetics, construction, transportation and electronics. Let’s take a look at the most common uses and benefits of silicone.

Why is silicone used in so many things?

Silicone can add many useful properties to a material. It enhances moisture and flexibility and increases resistance to cold, heat and ultraviolet light. Silicone can be liquid, solid, semi-viscous, rubber, oil or grease. Where might we find this amazing material?

Personal care and cosmetics.

Ask any makeup artist about primers and you can be sure that they will mention silicone. Silicone helps products to spread more easily and retain their colour. Silicone imparts shine on your hair and builds good SPF into skin care.

Electronics

Sturdy silicone makes up the outer casing on many phones, laptops and home entertainment gadgets. The interiors of these electronics also consist of silicone – the high thermal stability and dielectric properties make silicone perfect for electrical transmission.

Image Credit

Construction

Silicones are key to the construction of buildings large and small and are essential for energy efficiency. Silicone sealants and mouldings from companies such as http://www.meadex.co.uk prevent moisture getting where it should not.

Energy

Because silicones are so heat resistant, they are perfect for solar panels and photovoltaics. Being so durable, using silicones makes solar energy more cost-effective.

Kitchen kit

Silicone offers flexible, easy to clean, non-wearing kitchen equipment, from baking trays to cake cases. The silicone moulding does not impart any flavour to the food and is safe to use in freezers, microwaves and ovens.

Aviation industry

Silicones can withstand intense heat and also stress, making them perfect for the aviation industry. Silicones seal doors and windows and are used for wings, hydraulic switches, fuel tanks, landing gears and black boxes.

We are sure that silicone and developments in materials will continue to improve the world around us, from tiny chips in our smart technology to wondrous skyscrapers in the cities of the future.

As with all industries, SEO plays a huge role in enhancing the value of your real estate site. Many
realtors are realizing the importance of search engine results in bolstering their sales growth and investor base. Here are five ways to improve your SEO campaigns:

Research keywords

Use Google Analytics to track both global and local keyword trends. You can also you social media sites
like Twitter to track keywords through trending hashtags. Use the keywords you generate in order to enhance your webpage’s blog post titles.

Use media intelligently

This includes social media sites, especially location-based ones like Foursquare, and multimedia, even
newer augmented reality applications. On a more basic level, the inclusion of images is crucial for SEO. Each image should contain a URL that links to one of your keywords. But don’t just rely on images, use video as well.

In fact, the vast majority of successful real estate sites are using virtual tours as ways to give prospective homeowners a chance to assess the property in advance. The property doesn’t even have to be completely finished. For example, you may not have even installed the exit sign in a new coffee shop that’s under construction. In this situation, while technically you can’t really bring investors in to the shop you can keep them glimpses through a virtual tour.

Use inbound links

It’s hard enough finding authoritative sites to link to your content, the least you can do is link to
yourself. Each of your blog posts should contain relevant links to other articles and posts found on your website or blog. Inbound links works wonders for search engine optimization and keeps people searching through your content. Be careful not to link too much though, as link over-saturation can be construed as spamming, which hurts your Page Rank.

More content!

One of the most common mistakes made by bloggers is not posting enough content. Search engines gauge your
recent content activity as a major actor in SEO rankings. Especially in the constantly changing world of real estate, there’s no excuse to not have multiple posts a week.

Get backlinks

Backlinks are links to your site from authoritative sites and they are extremely valuable in the SEO world. They are also hard to get. Getting quality backlinks will require reaching out to online publishers, networking with heavy hitters in the real estate industry and possibly guest blogging for other sites.

These five tips—keyword research, media usage, inbound links, content generation, and backlinks—are extremely important in growing your SEO campaigns from the ground up.

The real estate market is increasingly being dominated by agencies that utilize technology and online tools effectively. Position yourself to be competitive!

Being the boss is a position that puts you in charge of the careers of many employees. When it comes to their performance, it’s up to you to make sure they work to the best of their ability. If they don’t, it will only reflect poorly on you. Therefore, it’s important that you understand how to bring out the best in your employees through human resource management. As long as you can do that, you’ll experience all the benefits and pride being the boss should provide.

Be Positive

You expect your employees to be positive so why wouldn’t you lead by example? Even though it’s important to reprimand employees when necessary, it is even more important to make sure they know they are doing a good job. Everyone enjoys positive reinforcement. Therefore, instead of only talking to your employees when they do something wrong, make sure you’re giving credit where it’s due. You don’t need to pat them on the back for every little thing, but a “nice job” or “good work” every now and then will keep spirits up in the office.

Good Communication

Good communication is an important element in any work environment. One of the best ways to foster this with your employees is to implement an open door policy. Make sure your employees know they can always come to you with any problems without having to worry about negative repercussions. You want your workers to feel confident when coming to you with any new ideas or problems they are experiencing. Emphasize that you’re always looking for feedback and ways to improve to encourage your employees to share ideas. Always be willing to listen so your employees feel heard. This will help them come forward and talk to you.

Teamwork

Creating a sense of being a team among your employees is an important factor in bringing out the best in everyone. Your human resource management team can help you with team building exercises. Learning to work together to solve problems and complete complex tasks will allow each of your employees to make use of his or her strengths, while allowing someone else’s strengths to overshadow their weaknesses. When your employees can work as a team, each using their own strengths, you will see an increase in productivity, as well as quality of work. Keep track of successes and challenges with human resource management software, as well as any promotions, raises or warnings. If you see patterns of positive or negative behavior, you can help your employees see what circumstances they do best in.

Don’t Place Blame

No one wants to work in a hostile environment. When your employees feel as though they are being blamed when things go wrong, it can make for a difficult work environment. Therefore, it’s important to avoid blaming others, even if it is their fault, when you’re approached with an issue. You should take it up with the person who is at fault, but it won’t help anyone to simply point fingers and place the blame on someone else. Instead, help the person understand what was done wrong and help to resolve the issue. Let him or her know that you understand mistakes happen so you don’t make your employee afraid to try for fear of making a mistake. This doesn’t mean you have to let mistakes slide, though.

A Proper Fit

As you get to know your employees better, you’ll get a more accurate view of their skills and interests. When employees are challenged and allowed to complete tasks they enjoy doing and are good at performing, they are more likely to work more efficiently. Employees who are confident in their abilities generally do better work.

As a manager, it’s your responsibility to bring out the best in your employees. You want them to enjoy coming in to work and to do a good job while they are there. If you use these tips with your employees, you will improve their productivity and have happier employees.

If you’re considering having new tarmac laid on your property, it’s really a job for the professionals. The skill level involved is considerable, plus the expense of getting all the right machinery and equipment and knowing how to use it all. Here’s how to get a good job for your tarmac needs:

Although tarmac is cheap, probably the most cost-effective hardstanding available, it only works out economical if you’re tarmacking a big enough area. The cost is mainly for all the machinery involved and getting on site. It can be worth considering clubbing together with neighbours if there are multiple driveways that could benefit from a new surface. This will make the job easier and cheaper for the contractor who can pass those savings onto you.

Image credit

When it comes to laying tarmac on drives, there are several layers involved. The first layer is the foundation. A typical driveway will need excavations going down to about 18cm. Next, a layer of sub-base consisting of crushed hardcore will be laid. This is then rolled by a road-rolling machine. If you have chosen kerbstone edging or decorative stone, these will be laid on either side and supported during the laying of the tarmac.

Tarmac is laid in two layers, the base and then the top surface known as the ‘wearing’. The base layer consists mostly of aggregate delivered in a heated lorry and once laid, the tarmac can be spread over it and levelled with rakes. Back comes the roller to compact all the layers together and it will continue until no marks are visible on the surface.

The top surface contains smaller bits of aggregate, giving a finer appearance and offering strength and durability. If a good, professional job has been done, in future the driveway can be refreshed by skimming this top layer and putting down an overlay of tarmac.

A freshly laid drive will set relatively quickly and after a couple of hours will be available for careful use. For the first week, it’s a good idea to avoid any sharp braking, acceleration or turning the wheels when the car is stationary.

Image credit

The best way to get a really good-looking driveway that will last for many years is to find a reputable company. For Tarmac contractors Yorkshire, visit https://www.wrsroadsurfacing.co.uk/

Always check to see how long a firm has been in operation and ideally, ask to see examples of recent work they’ve carried out. Never let anyone offer to tarmac your drive who has just knocked on your door out of the blue. You could find yourself dealing with unscrupulous traders who will likely overcharge you and supply you only with a thin layer of tarmac that won’t last more than a few weeks.

As the temperature falls outside and everyone is running around buying last minute gifts, the last thing anyone needs at this time of year is frozen or burst pipes. Frozen pipes can stop your heating working, and worse, frozen pipes can burst. As the water running through the pipes cools due to very low temperatures, it can start to turn to ice. Ice of course expands, so causing the pipe itself to fracture and burst. Here we look at how to prevent your pipes from freezing, and what to do in the event that they do burst.

Image Credit

Prevention

The best thing to do is insulate your pipes. You can get pipe lagging material from your local DIY store. Insulate your pipes with it, being careful to not miss any bends, fittings or valves. Keep the temperature in your home steady, and if you go away for the holidays this year, be sure to leave the heating on low. Set the thermostat to at least five degrees.

You should have a check of your home insurance too. Be sure to comply with the directives of your policy. Should the worse happen whilst you are away, you need to make sure that you are covered by your insurance.

What to do if your pipes freeze

Gently warm up the pipes to get the water inside flowing again. Gentle is the key word. If you heat up the pipes too quickly they might crack. Use a hairdryer on its lowest, coolest setting. Or you could wrap a tea towel that has been soaked in hand hot water around the pipe.

Image Credit

If the pipes do burst, locate the stopcock and turn off the water. Next you need to call the experts. If you do need emergency plumbers Dublin has many excellent services like www.plumberservicesdublin that can help you.

Open all of the taps in your home to reduce any flooding, and soak up any water that is leaking from the burst pipe as best you can with towels.

Whilst a cold and white Christmas is the stuff of children’s dreams, it can be problematic for pipe work. If you look after and monitor your pipes, and know what to do in an emergency, you will be able to relax and enjoy the winter.