Moulding has a number of different types, so knowing what each one is can help you decide which one to use for your particular project. The two most common moulding processes are either cold-forming or hot-forming. Cold-forming means that the plastic is forced into the mould by a heating process such as a blow-mould, but the plastic is not solidified in the mould until it is completely cooled, meaning the process can take a long time and is therefore more suited to larger jobs. However, if you have limited resources, or you simply want to make sure that the final result is of a certain standard, then you may prefer to go for the hot-forming process, which involves pouring the plastic into the mould and then allowing it to cool slowly so that it is solidified in the mould immediately.
As well as the different types of moulding processes being used, you will also find that there are a number of different ways in which a material is moulded. For example, it may be poured into the mould as a single cavity, or it may come in sections. If the moulding methods are chosen for the right job, then the finished product will have a consistency across all sides, but this is not always the case. In these cases, using several different types of moulding will ensure that the plastic is moulded in a consistent and uniform manner, regardless of how many cavities it has. For Rubber Moulding UK, visit Meadex
There are many benefits to using moulding, but it is also worth bearing in mind that each type of moulding can be slightly different in appearance. This is especially true for those that use blow-moulding or hot-moulding methods.